680 jobannoncer matcher din søgning 680 jobannoncer fundet

Industritekniker med CAM-erfaring

Er du en dygtig industritekniker med flair for CAM og en passion for fræsning? Søger du nye udfordringer og muligheder for personlig udvikling? Så læs med her!

Vi leder efter en engageret industritekniker med erfaring inden for CAM. Din hverdag vil være fyldt med spændende udfordringer, hvor du vil være med til at implementere nye bearbejdningscentre og sikre høj kvalitet i vores produktion. Vi tilbyder fleksible arbejdstider, så du kan skabe balance mellem arbejde og fritid.

Kemiingeniør – byg pilotanlæg, der kan skabe grønnere ammoniak

2 % af de globale CO₂-udledninger stammer fra produktionen af ammoniak. Synes du også, at det er 2 % for meget? Og vil du være hjernen bag de pilotanlæg, der skal opskalere vores prototype til en demonstration unit?

Så kom og få en hverdag med startup-ånd og fleksible arbejdstider.

Vi har potentialet til at gøre produktionen af ammoniak CO₂-neutral. Og du bliver den, der designer og bygger de anlæg, der får os i mål. Så du kan virkelig få virksomheden til at blomstre

Mechanical Technician

Du bliver ansvarlig for egne opgaver, men vil indgå i tæt samarbejde med dine øvrige dygtige, hjælpsomme og engagerede medarbejdere i produktionen.

Du kommer til at gøre en forskel ved bl.a. at:

• Sikre rettidig og kvalitetsbevidst montage af nybygget udstyr.
• Fejlfinde, servicere samt udføre montage på kundernes maskiner og udstyr.
• Være den pålidelige ”håndværker” over for ENABL´s kunder.

Du får mulighed for selv at påvirke og optimere din dagligdag, og du bliver en del af en hverdag, hvor aktivitetsniveauet og humøret er højt.

Er du kemifagligt stærk – optimér vores processer, når vi øger produktionen

Vil du være med til at videreudvikle vores arbejdsgange, når vi omdanner halm til ethanol, prebiotiske fibre og lignin – og dermed udnytter ressourcer, der ellers kunne være gået op i røg?

Du kommer ind, bedst som vi skal øge vores produktionsmængde. Og med dine inputs vil vi forhåbentlig også kunne nedbringe vores elforbrug og CO₂-udledning undervejs.

Supply Chain Controller

Vi søger en økonom, nyuddannet eller med et par års erfaring, til en stilling som Supply Chain Controller med vilje og lyst til at understøtte Midsonas fortsatte vækstrejse.

Opgaver:

• Løbende sammenligne, analysere og følge op på resultat- og driftsresultater samt understøtte budget og prognoseprocesser
• Kostprisopfølgning samt beregning af kostpriser

Vi har en uformel omgangstone og højt til loftet i et travlt og positivt arbejdsmiljø.

Senior Project Manager for global airport projects

As a Technical Project Manager, you are responsible for the overall technical and system integration of our baggage handling systems. You look into system requirements, specifications and design to make software and electromechanical systems come together.

You take the technical lead on larger or smaller projects that are installed across international airports, and you collaborate closely with a Senior Project Manager who handles the commercial and contractual side of the projects.

Radiografuddannelsen i Næstved søger underviser

Har du viljen og evnerne til at give kommende radiografer den bedste uddannelse indenfor det sundhedsfaglige virke? Hvis ja - så har vi måske lige den rette stilling til dig.

I september 2022 startede vi det første hold radiografstuderende på vores campus i Næstved. Gennem studietiden er det vores opgave at lære dem at mestre et avanceret håndværk. Samtidig skal de studerende udvikle sig, både fagligt og personligt, til at kunne agere og kommunikere i mødet med sundhedsvæsenets forskellige grupper af mennesker.

Vi har nu behov for dig til at understøtte den gode læring, som vi har opnået indtil videre, og som vil være en aktiv spiller i den videre udvikling af radiografuddannelsen.

Montagetekniker øst for Storebælt

Et spændende, frit og udfordrende installations-/teknikerjob i en international koncern med gode ordnede forhold.

Hos os vil du arbejde med installation, service og reparation af vores kunders automatiske dør løsninger. Vi installerer og servicerer alle typer af indgangsløsninger ved alle slags kunder. Lige fra automatiske indgangsdøre, dørpumper, branddøre clean døre, karruseldøre og speedgates.

Vi kan bl.a. tilbyde et spændende job i en stor international koncern med nye udfordringer hver dag samt gode kolleger i et inspirerende og uformelt miljø.

.

Student Assistant - Data Analysis and Testing Procedures

We are seeking a motivated and detail-oriented student assistant to join our team and support our data analysis and testing procedures. You will have the opportunity to gain hands-on experience in data analysis techniques and contribute to important projects within the company.

Key responsibilities:

• Assist in collecting, organizing, and analyzing data.
• Conduct testing procedures to ensure the accuracy and reliability of our products/services.
• Collaborate with team members to identify patterns, trends, and insights from data.

Working hours are 10-15 hours a week with flexibility around exam times.

Product Owner (Engineer)

Do you like complex power systems development, stakeholder management and driving tool development towards value creation? Are you open minded and enjoy working in a diverse and international team? And are you eager to be part of something new and meaningful?

We are looking to recruit a Product Owner for the Nordic RCC tool used for flow-based capacity calculation and common grid model – two of the core services provided by Nordic RCC.

So, if you can say yes to the above, then you may be just the person we are looking for.

Senior HV Asset Integrity Specialist

Imagine a future where you unleash your potential to support the technical challenges related to the integrity of the offshore wind transmission systems.

Join us in this role where you’ll be responsible for the integrity of the HV assets within the offshore and onshore substations for the offshore wind farm operation sites. You’ll play a key role in determining and optimising the maintenance needed for transmission systems and optimising the scope based on Reliability Centred Maintenance principles.

System Developer, Full Stack

You will be joining a development team developing and maintaining applications for Grundfos production sites globally. We are designing for the best possible usability for our shop floor operators to maintain and improve high quality in production performance.

Our success is based on our team spirit and effort to help each other. We appreciate an open mindset and a straightforward approach – support is always at hand and by sharing information we grow stronger.

Application Consultant

You will use your business acumen and collaboration skills to work with both management and shop floor operators to improve production processes and utilizing IT solutions for the manufacturing automation domain.

You will have domain knowledge of shop floor processes, and experience with Manufacturing Execution System (MES), Manufacturing Information Systems (MIS), database operator tasks, and common communication protocols used to interface production equipment.

Manager – Global Governance for Maintenance and Metrology

Our department plays a vital role in the strategy execution, from participating in the early CAPEX project design phase to the implementation and following going into operation within Utility, HVAC, Automation, etc.

You will

• Manage the team of Engineers to support Maintenance and Metrology strategies
• Setting strategic direction for Metrology and Maintenance across Bavarian Nordic
• Project manager for the upgrade of current and new Metrology and Maintenance systems

Embedded Software Developer

Har du solid erfaring med at udvikle komplekse embedded systemer i C/C++ og forståelse for hardware? Og er du entreprenant med lyst til at blive en del af en nyere, up-coming virksomhed med højt til loftet og store ambitioner?

Som vores nye Embedded Software Developer bidrager du til at skabe det tekniske fundament for en sikker og effektiv realisering af den ønskede løsning, ligesom du er med til at sikre, at vi leverer og implementerer kode af høj kvalitet.

Analytical Chemist – 12 months position

We seek a highly motivated ANALYTICAL CHEMISTRY scientist, engineer, or technician for our research laboratory in Copenhagen.

The position will give intellectual challenge and rich possibilities to develop your skill sets as well as being part of commercially and scientifically exciting projects.

You will contribute to the development and maintenance of River Stone’s analysis platform, method development as well as routine sample analysis. You will be part of an enthusiastic and strong analytical chemistry team.

Service Technicians - Electrical

Are you interested in working as a Service Technician in the service field? Want to be part of a team of colleagues from around the world who manage a wide range of service tasks for the wind turbine industry on a daily basis?

You will be responsible for diagnosing and repairing electrical equipment and systems in a variety of settings, including industrial environments both on- and offshore.

Intern, Mechanical Engineering

Do you want an exciting Intern position where you can get practical experience in the field of Mechanical development while working with a team of skilled colleagues?

Right now, EPOS is looking for you – a dedicated and motivated student Intern who would like to become part of our journey with bringing excellent sound to thousands of people's daily calls and music experiences with our premium headsets and audio devices.

Care for Potential – Trainee Program – Denmark

We believe that together we can create a sustainable tomorrow by caring for our resources. The Care for Potential Trainee Program, starting September 2nd, 2024, is a unique opportunity to use your potential and build your career while contributing to something of real value.

The purpose of the program is to provide ambitious young professionals with a structured framework and on-the-job training, as well as hands-on education and invaluable experiences. The program is designed to be both a digital and on-the-job experience with occasional travels, both nationally and internationally.

Elektronikmekaniker / Elektroniktekniker til fejlfinding og reparation

Vi tilbyder et alsidigt job, hvor du med de rette kvalifikationer vil få mulighed for at deltage i planlægningen og udførelsen af en bred vifte af spændende opgaver inden for fejlfinding, reparation og service af vores produkter.

Arbejdsopgaver

• Fejlfinding og reparation af print på komponent niveau (HF, analog og digital teknik)
• Reparation og service af kunde RMA'er (elektronik og mekanik)
• Test og kalibrering