49 jobannoncer matcher din søgning 49 jobannoncer fundet

RPA-konsulent der vil gøre en forskel for klinikere, borgere og patienter

Vi har brug for dig, der kan optimere arbejdsgangene og gøre en forskel for kollegerne på tværs af regionen. Dig, der både kan programmere og dokumentere, og som har lyst til at tage del i udviklingen af fremtidens digitale, datadrevne sundhedsvæsen. Er det dig?

Vær med til at drive digitaliseringen af sundhedsvæsnet til gavn for vores borgere, patienter og kolleger. Vi tilbyder en stilling med spændende og udfordrende opgaver i en hverdag med personlig og faglig udvikling og fleksible arbejdsdage på et kontor med højt til loftet og gode grin.

PhD scholarships (2) on Theory, Fabrication, and Optical Characterization of Subdiffraction Photonic Cavities – DTU Electro

DTU Electro are looking for two bright and motivated PhD students within subdiffraction cavities based on silicon bowties with the overarching goal of exploring new regimes of light-matter interaction.

The first position includes a strong element of nanofabrication but numerical design, theory, and optical measurements are important as well. The second position will be focused mainly on design, theory, and optical measurements.

Nanofabrication Engineer - DTU Electro

We are looking for a highly experienced engineer to optimize our nanofabrication process of thin-film lithium niobate photonics platform.

Optimization of the nanofabrication process of thin-film lithium niobate photonics platform, which is one of the key platforms for future quantum photonics computing technologies. The goal of the job is to obtain the ultra-low loss and high-speed thin film lithium niobate photonics platform, and to fabricate the quantum photonic devices designed by the team members based on the optimized nanofabrication process.

PLC-programmør

Er du en erfaren PLC-programmør på udkig efter nye udfordringer? Vi søger en dygtig og dedikeret PLC-programmør til vores team i Johnson Controls. Så læs mere om, hvad vi kan tilbyde dig!

I rollen som PLC-programmør vil du være ansvarlig for at designe, udvikle og implementere programmer, der styrer driften af vores PLC-systemer.

Graduate – Software Automation Program

Cognizant Denmark is currently seeking applications from Graduate Engineers for our Graduate Program in 2024 based in Hillerød, Denmark.

Successful candidates will be part of the Global Graduate Program.

This Program is an intensive 8-week Training Program that consists of Classroom Training, Workshops, Theory, Practical Training, and a Simulation Project.

Sales and Project Manager

Do you have experience with project application and possess commercial flair?

We are currently looking for a new Sales and Project Manager, who will be responsible for supporting our internal and external customers with managing projects throughout all phases from from sales to delivery, and thus contribute to the continuous development of the organization.

Today, Johnson Controls leads the market in the design, marketing, sale, and service of refrigeration plants and heat pumps for industrial, marine, and offshore applications.

Sales Engineer

You will be responsible for offering sales support to our internal customers and partners. You will become the point of contact for your customers, and you will develop and maintain relations with several stakeholders, including your customers, partners, and our factory.

In this role, you will touch upon several aspects of the sales process, including preliminary research and support, quotations, design specifications, participation in customer meetings and consultations. Moreover, you will leverage your technical insight into the calculation and design of optimal solutions in collaboration with your customers.

Area Sales Engineer

If you have a passion for technical sales and want to contribute to driving innovation in the refrigeration and heat pump industry, then please read on about this exciting opportunity!

Johnson Controls is currently seeking an Area Sales Engineer to lead the sales of industrial refrigeration and heat pump projects in the Zealand region. Join our dedicated sales team and be part of an organization with a diverse product portfolio, allowing us to deliver customized solutions to meet our clients' specific needs.

Talent 2024: Start your career within Pharma & Life Sciences in CGI's MES/Automation talent program

Our most important task is to prepare you for the tasks you will solve. In cooperation with the companies that developed the systems, you will be certified in the technologies used, such as PROCOS, PAS-X and 800xA.

You will be involved in all phases of our projects, including sales support, consultancy, specification, design, engineering, construction, programming and testing, verification and validation, and commissioning with the end customer.

Engineer with focus on green transition, sustainable power transmission, and power systems

Want to use your engineering skills to play a part in the green transition?

The position will be in the Resilience Team, which is part of the Service Development department working with Outage Planning Coordination (OPC), Short-Term Adequacy (STA), Critical Grid Situation (CGS) and more.

Key responsibilities for the role will be:

• Become an expert in one or more of the services included in the Resilience team as well as support and ensure their development.
• Lead as well as join task forces and initiatives within Nordic RCC or TSOs across the Nordics and Europe.

Lead System Engineer, Product Development

Are you looking for a position where you will have a substantial influence on future technology decisions?

You will be taking the lead on the technical part of the future solutions. You will be a central link between project members working on electronics, mechanical and software development, management, and many other functions.

The role will connect you with a vast network across Grundfos holding the responsibility of driving the technical solution of future products in the right direction.

Senior Hardware Development Engineer

Are you looking for a position covering all phases of product development and maintenance in a self-organizing agile team? We are looking for a committed senior engineer excelling in electrical design and mechatronic insight.

We are expanding our development right now to be able to support all the requirements of our business. A key challenge in this position is to create an optimal design meeting our high-quality standards and at the same time is cost-effective.

LTECH søger CTS-teknikere til forskellige områder af deres forretning

Vi søger CTS-teknikere til at servicere anlæg på Sjælland. Du starter hjemmefra og som regel ved du i god tid, hvad dagen bringer, da du som oftest selv har planlagt dine opgaver efter aftaler med kunderne.

Arbejdsopgaverne kan bl.a. være:

• Planlagt vedligehold af systemerne. Der kan opstå akutte situationer, hvormed disse opgaver aftales med din leder. Kunderne er primært industri, store ejendomme, skoler, kommuner og detailkoncerner.
• Afrapportering og dokumentering.

Senior programmører

Har du erfaring med udvikling af PLC applikationer til industrien - gerne med erfaring i Vand og Spildevand - og lyst til at blive en del af en virksomhed med fokus på faglig kvalitet og medarbejdertrivsel?

Dine arbejdsopgaver bliver bl.a. projektledelse, udvikling af PLC & HMI-programmer samt indkøring af anlæg.

Du bliver en del af et stærkt og bredt fagligt team, der har det sjovt sammen og hjælper hinanden, når der er travlt

R&D Automation Engineer

Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do!

The R&D Automation Engineer will be a key asset in developing electrical and automation designs of our future products, technologies and services.

ANDRITZ understands that life is a dynamic balance between personal and professional and believes that a successful and fulfilling career varies between people, so we offer a broad range of flexible opportunities.

Senior Control Engineer (ID 38026)

As our new Senior Control Engineer, you will play an important role in the design, development, and implementation of control systems within our products.

Your main responsibilities include taking a leading role in a cross-functional team, including software engineers, hardware engineers, and product designers, to translate system requirements into control system designs.

This is an excellent opportunity to apply your skills and knowledge in control engineering and contribute to the success of our engineering team!

Training Specialist (maternity cover)

Our busy Technical Training team is going to need a maternity cover! The Technical Training team are responsible for the development and roll-out of our online and in-person customer training. Do you want to join us on the continuous journey within mobile robotics?

At MiR, you will find yourself in an exciting industry constantly working on improving our products and investigating new technologies. We are dedicated to finding better and safer ways of moving things from A to B, and you will play a key role in getting there by designing and implementing solutions for existing and upcoming projects.

Intern softwaremedarbejder/supporter

Som følge af fortsat vækst søger vi forstærkning til vores software-relaterede opgaver i samarbejde med vores tekniske afdeling og After Sales afdeling. Du vil få stor daglig berøringsflade med såvel håndtering af kundehenvendelser vedr. software, el og mekanisk support samt yde hjælp til interne projekter, projektledere og online assistance til egne og eksterne teknikere i forbindelse med installationsopgaver.

Stillingen indeholder mange forskelligartede arbejdsopgaver, og ikke to arbejdsdage er ens.

Senior Test Engineer

Join GE HealthCare to help perform transducer integration on our next-generation ultrasound scanners and further develop our test tools and laboratories.

As our new Senior Test Engineer, your typical tasks will include measurements of sound pressure, acoustic power, thermal characteristics, image performance and other transducer properties.

You will take part in hands-on work while also playing a key role in maintaining and further developing our transducer integration processes and two laboratories.

Automations-/PLC-programmør til specialfremstillede maskiner

Vil du arbejde med den allernyeste teknologi i en af Danmarks førende virksomheder inden for specialfremstillede maskiner? Og har du lyst til at programmere og udvikle maskiner til store danske virksomheder i bl.a. legetøjs- og medico-branchen?

Vi forestiller os, at du er uddannet automationsteknolog, ingeniør, stærkstrømstekniker eller maskinmester – det vigtigste er dog, at du har stor interesse for softwaredesign, indkøring af maskiner og samspillet mellem el og mekanik.

Er du interesseret?