EL-konstruktør søges

Vil du være en del af en af landets førende producenter inden for salg af end-of-line pakkeløsninger?

Som El-konstruktør vil du komme til at arbejde med udvikling og implementering af kundespecifikke løsninger hos kunder hovedsaligt i Danmark men også Nordeuropa.

Du vil være med i projekteringsfasen, hvor der skal udvælges komponenter, placering, indkøb og tegning af el-diagrammer til montageafdelingen.

Der er fokus på efteruddannelse, så du er opdateret på den nyeste software og hardware.

PCBA Test Engineer

During design reviews, you will leverage your expertise in PCBA testing to assess the testability of proposed designs. You will analyze circuit layouts, component placements, and connectivity to identify potential testing challenges and opportunities for improvement.

Our working culture is based on trust and teamwork, and you can expect to enter a great working place where you can bring your ideas to the table and make a real difference.

Electrical Site Supervisor

Er du parat til at gøre verden til din arbejdsplads? Med 150+ rejsedage om året bliver du en af vores vigtigste repræsentanter på kundernes sites, hvor vi leverer og installerer komplekse og højteknologiske logistikløsninger.

I tæt samarbejde med Site Manageren og den ansvarlige el-konstruktør vil du være med til at forberede elinstallationen og montagesekvenserne i detaljer, inden du på site kommer til at stå for den tekniske ledelse samt vejledning af underleverandører.

Site Manager

Er du vores nye jonglør?

På kundens site har vi behov for en Site Manager, der forstår at styre processen det sidste og vigtige stykke af vejen. Du vil derfor fungere som leder af hele siteteamet og have det fulde ansvar for installationen, herunder interne og eksterne leverancer.

Installation og implementering er en kompleks proces, der kræver gode kommunikationsevner og evnen til at håndtere f.eks. justeringer af projektet på stedet, ligesom der er behov for en forståelse for detaljerne, der sikrer, at sådanne justeringer bliver dokumenteret.

Electrical Control Panel Designer

Are you passionate about designing innovative electrical solutions that drive efficiency and reliability? Are you experienced in design and layout of control panels? If so, this is the opportunity for you. We are currently looking for an Electrical Control Panel Designer to join our Electrical team at Green Hydrogen Systems.

As a Control Panel Designer, you will play a key role in the design, documentation, and production support of electrical Control Panels. Your expertise will be essential in ensuring the seamless integration of electrical components within larger systems, contributing to the success of our projects.

Senior Designers

Are you ready to work with us to realise the potential CCUS has in making a lasting, positive impact on our environment?

What will you be doing?

• Perform 3D design of Carbon Capture plants, within the following areas
  • Piping and Layout (P&L)
  • Structural
  • Electrical and Instrumentation (E&I)
• Prepare and check technical drawings, e.g. Piping ISOs, Equipment and Structural GAs, Plot plans
• Create MTOs for procurement

Vice President, Operation to DEIFs Production

Are you an experienced leader in automated production of electronic? Then join us for an exciting opportunity as Vice President, Operation for our brand-new automated factory. You will play a pivotal role in ensuring high delivery performance and operational excellence.

Our production area is divided into operations and development, and this role primarily covers operations focusing on ensuring a high delivery performance.

You will lead a team of approximately 55 people across different departments/teams on 2 shifts. You have direct report from 2 production managers and will be a member of the management team in Global Operation.

Senior Manager - for our Embedded Hardware area

Are you an experienced (Senior) Manager with a proven track record within embedded hardware and software design? Are you motivated by setting the strategic and tactical objectives and execution with focus on technology, and by defining the interface within core and third party solutions?

Your responsibility will be to lead a team of 11 employees and 5 external consultants developing state-of-the-art embedded HW solutions. Focus is needed to streamline the design process as well as defining core and 3 party elements to accelerate digital transformation.

Senior Project Manager (ID 38789)

Are you passionate about bringing new products to the next level delivering sustainable & decarbonized products to the market in a job position where you have great opportunity to develop and be a part of our digital journey?

If so, you should read further. Danfoss Climate Solutions' HydronicS Division is seeking a Senior Project Manager to join our Floor Heating Controller & Electronic Thermostats Product Team in Kolding.

Maintenance and Engineering Specialist - ARINCO - Videbæk

Brænder du for dagligt at udvikle og ajourføre tekniske dokumentation på udstyr? Og kan du samtidig tage LEAD på implementeringen af vedligeholdelsesstrategier på udstyr i tætsamarbejde med 35 engagerede kollegaer?

Som M&E specialist er det dig der sikrer ajourføringen og udviklingen af vores tekniske kravspecifikationer som benyttes for både nye tekniske projekter og løbende vedligehold. Du formidler vores krav på tværs på fabrikken.

Lead System Engineer, Product Development

Are you looking for a position where you will have a substantial influence on future technology decisions?

You will be taking the lead on the technical part of the future solutions. You will be a central link between project members working on electronics, mechanical and software development, management, and many other functions.

The role will connect you with a vast network across Grundfos holding the responsibility of driving the technical solution of future products in the right direction.

Senior Hardware Development Engineer

Are you looking for a position covering all phases of product development and maintenance in a self-organizing agile team? We are looking for a committed senior engineer excelling in electrical design and mechatronic insight.

We are expanding our development right now to be able to support all the requirements of our business. A key challenge in this position is to create an optimal design meeting our high-quality standards and at the same time is cost-effective.

Løsningsorienteret tekniker med IT-kompetencer til Siemens Security

Savner du en hverdag med opgaver, der udfordrer din faglige viden? Har du evnerne til at tænke i nye løsninger, og tør du stå ved dine vurderinger?

Du vil udføre opgaver i høj kvalitet inden for tyverisikring, adgangskontrol og videoovervågning.

Du håndterer oftest mødet med kunderne selvstændigt, men du har altid har et bagland af passionerede teknikere, som står klar til at samarbejde, og hjælpe dig i gang med dine nye opgaver.

Project Manager – Denmark

Eurowind Energy is looking for an experienced Project Manager to manage construction of energy projects within technologies such as Wind, PV Solar, Batteries, Biogas, and PTX, primarily in Denmark.

As Project Manager, you'll be the overall responsible for your construction project(-s). This role includes coordination with internal stakeholders such as Project Development, IT, Project Finance and Asset Management, alongside external contractors and suppliers.

SCADA Operation Manager

If you thrive in a dynamic and collaborative environment and have the required skills, we invite you to apply for this challenging role.

On a daily basis you will be reporting to the SCADA Team Lead, who is responsible for managering the team, and you will coordinate the management of your tasks in collaboration with him and the rest of the team.

Proposal Manager for Aerostructures in Grenaa, Denmark

Working in the Business Development team you will be surrounded by highly skilled and experienced colleagues, and you will quickly feel the drive and motivation that shapes our team.

You will be an instrumental player in our proposal production efforts and work with forecasting and planning of proposal activities, support BD sales lead in proposal production and ensure proposal stakeholders are continuously consulted during proposal production

R&D Automation Engineer

Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do!

The R&D Automation Engineer will be a key asset in developing electrical and automation designs of our future products, technologies and services.

ANDRITZ understands that life is a dynamic balance between personal and professional and believes that a successful and fulfilling career varies between people, so we offer a broad range of flexible opportunities.

PhD Scholarship in Quantum Physics and Quantum Information Science - DTU Physics

The Quantum Physics & Information Technology (QPIT) group at DTU Physics is seeking exceptional individuals to join our team as PhD students.

We specialize in quantum information processing, quantum communication, and quantum sensing using cutting-edge technologies such as quantum optics, quantum optomechanics, and diamond physics.

Joining our team will provide you with numerous benefits, including the opportunity to explore completely new regimes of physics and information, both theoretically and experimentally.

Repairability & Field Quality Specialist

Are you passionate about legendary sound, and think it is fun to work with electronic devices? Are you eager to provide the best technical service and help both colleagues and independent partners to do the same?

Do you want to be a part of a global company manufacturing, developing, and distributing some of the world’s largest audio brands, such as JBL and Harman Kardon? Then we have the opportunity of a lifetime for you!

Quality Assurance Engineer for our production facility

Would you be excited about working with state-of the art electronics for space missions and self-defense in aircrafts and battleships? Do you have expertise and a passion for quality in manufacturing?

We produce mission-critical equipment where quality and reliability are of utmost importance. As part of the independent Q-function, you will take a key role by preventing defects, ensuring compliance, and supporting on-time delivery of high reliability products to our customers.