PhD scholarship in Neural Networks-based X-ray Tissue Imaging for Robotic Automation – DTU Compute

We are seeking applicants for a 3-year PhD position to join the DEXTRA research project, funded by Innovation Fund Denmark.

The overreaching objective of DEXTRA project is to develop X-ray imaging solution for integration into robotic meat deboning plants. Your PhD project will focus on developing reconstruction and analysis methods capable of determining 3D tissue composition (bone, meat, fat, air) from a limited number of projections, while ensuring sufficient accuracy. To achieve this, we plan to develop CT reconstruction leveraging pre-trained neural fields.

PhD scholarships in Corrosion of Power Electronics Systems – DTU Construct

If you are looking for an exciting opportunity for PhD, we at Materials and Surface Engineering Section, Department of Civil and Mechanical Engineering, Technical University of Denmark is seeking candidates for 2 PhD positions to work on corrosion failure mechanisms of Power Electronic components when they get exposed to humidity and other corrosive gaseous conditions.

DTU is a leading technical university globally recognized for the excellence of its research, education, innovation, and scientific advice. We offer a rewarding and challenging job in an international environment.

Medarbejder til PTA-afdeling

Din primære arbejdsopgave vil være at varetage overdragelsen af nye produkter fra udviklingsafdelingen til produktionen samt yde support til produktionen indenfor det tekniske område.

Ellab tilbyder spændende faglige udfordringer i en international og innovativ virksomhed med en stærk kultur og ambitiøse mål indenfor vækst, diversitet og bæredygtighed. Det daglige samarbejde bygger på gensidig respekt og er med til at gøre det sjovt og meningsfyldt at gå på arbejde.

Anlægsspecialist søges som spydspids for den grønne omstilling

Er du elteknisk-minded, og kunne du tænke dig et meningsfyldt job, hvor du kan gøre en kæmpe forskel for vores kunder på Sjælland ved at hjælpe dem med at blive tilsluttet elnettet?

Så får du her chancen for at tage ansvar for alt fra enkle tilslutningsopgaver til hele infrastrukturer – uanset om du har lidt eller meget erfaring med i rygsækken.

Tekniker til kalibrering af måleudstyr – Pharma & biotek

Har du teknisk snilde og lyst til en rolle som kalibreringstekniker? Uanset baggrund så er Buhl & Bønsøe klar til at uddanne dig til en hverdag i deres eget laboratorium og til on-site-opgaver hos deres pharma/biotek-kunder.

I din hverdag varetager du den praktiske kalibrering samt planlægning og dokumentation af eget arbejde. Opgaverne udføres efter fastlagte procedurer og inden for områderne temperatur-, fugt- og trykmåleudstyr. Du arbejder selvstændigt med kalibreringsopgaverne, som du følger fra start til slut. I forbindelse med kalibreringen udarbejder du dokumentation i form af kalibreringscertifikater.

PhD scholarship in Machine Learning in IoT Edge Devices – DTU Electro

Are you eager to dive into the world of Machine Learning, embedded IoT systems & Edge computing to make a tangible impact in real-world scenarios? We're looking for motivated individuals who want to become experts in machine learning in IoT edge devices.

As our new PhD student within Machine Learning in IoT edge devices, your primary mission is to drive advancements in the areas of Machine Learning, Deep Learning and efficient implementations in IoT devices and networks. In particular the research should have a focus on limitations and opportunities seen in relation to current consumption and resource limitations in edge-devices.

Test Engineer for Power-to-X test center in Lyngby

You will commission and carry out tests and data analysis on our new and existing equipment in lab- and bench-scale to support our development activities on our proprietary solid oxide electrolysis technology.

You will have an important role in our test center, bridging the gap between our internal customers in the Power-to-X cell development project and our internal and external suppliers.

Nysgerrig tekniker med elektronisk kendskab, til testfaciliteter - DTU Construct

På DTU Construct søger vi lige nu en tekniker til vores testfaciliteter, hvor vi tester materialer, konstruktioner og meget andet.

Har du lyst til at deltage i undersøgelse af 3D printede betonkonstruktioner, men i lige så høj grad udføre elektroniske måletekniske opgaver, og være en del at de talrige andre tests af materialer og konstruktioner der foregår på DTU Construct, bl.a. i DTU Structural Lab; et af de største laboratorier til mekanisk test i Nordeuropa. Så læs videre.

PhD Scholarships in Microfabricated Ultrasound Transducers – DTU Health Tech

These multidisciplinary PhD-research projects are focused on developing silicon MEMS (micro-electro-mechanical systems) based 3D ultrasound transducers for medical ultrasound using cleanroom based micro-fabrication techniques. In the project a wide range of different processing techniques will be used, and new methods developed.

So, if you are looking for a career in development and fabrication of microdevices with cutting edge cleanroom facilities and medical ultrasound this project could be a perfect match for you.

PhD scholarship in Measurement Methods, Reliability, and Uncertainty in Acoustic-Mechanical Microsystems – DTU Electro

Are you interested in developing and advancing state-of-the-art measurement methods for sound and vibration in miniature audio systems?

The small scale of smart hearables such as ear pods, headsets, and hearing aids present unique challenges to accurately and reliably measure the acoustic and vibroacoustic behaviour of their components. But modelling, simulation, and optimization of such devices relies on accurate measurement data.

As a PhD candidate with us you will investigate and develop measurement methods suitable for small parts and evaluate reliability and uncertainty of these methods.

Projektleder til kabellægning – Bliv en del af holdet, der fremmer den grønne omstilling

Hele Danmarks elnet står over for en gennemgribende renovering – og som vores nye projektleder er du med til at sikre forsyningen til vores eldrevne fremtid.

Og så kan du glæde dig til en hverdag med rig mulighed for fleksibilitet og selvledelse.

Vi sætter meget fokus på mennesket i vores afdeling, og jeg vil gå langt for dig og dine kolleger – så vi skaber et miljø, der rummer alles baggrunde og behov.

PhD scholarship in digitalization of polymer-based battery electrolyte development - DTU Energy

If you have the ambition to build your scientific career at the forefront of cutting-edge research and contribute to accelerating green transition via digitalization, we have a perfect PhD opportunity for you.

You will work on a project to design fluorinated polymers prepared through light-induced polymerization. The design space for finding the optimal composition and synthesis conditions for polymer electrolytes is too vast to explore manually. Therefore, we are combining self-driving labs, high-throughput atomic scale simulations, and AI to transition to digitalization-based automation of electrolyte development.

Senior Group Patent Engineer

If you are passionate about innovative product development, advanced material technologies, physics, mechanics, sensors, IoT, etc., and wish to work within the framework of an ambitious sustainability agenda, we invite you to join us.

You will work with some of the best in their respective fields, in an environment that is both challenging and characterized by mutual respect, common goals, and shared values.

PhD scholarship in Quantum Information Security and Randomness Certification – DTU Physics

Are you excited about information security and the novel possibilities opened up by quantum technology? Are you fascinated by quantum physics and intriguing phenomena such as quantum entanglement, nonlocality, and indeterminism in quantum measurements?

We are seeking an excellent and highly motivated PhD candidate to work on the theory of novel quantum randomness certification protocols. In this project, we will connect fundamental physics to information security, establishing the security analysis of new, cutting-edge devices which can be implemented with quantum optical technology and will be realised in the lab.

Senior Technical Writer

Do you have the ability to present information about technically advanced products in structured and accessible manner for customers?

Your main responsibility will be to lead the design and development of high-quality customer-oriented technical documentation, including operator, maintenance, and system manuals for radar systems.

Procesingeniør

Har du erfaring med komplekse tekniske anlæg, der leverer forsyning til en halvledervirksomhed med store kvalitetskrav?

Du vil blive en del af Topsils Utility-afdeling, der består af en erfaren utility teknisk medarbejder, en daglig leder, der også har ansvaret for Facility Management, og du vil tilmed have stor berøringsflade i R&D og vores projektafdeling.

Af områder, som indgår i denne stilling, kan nævnes:

• At sikre en løbende procesoptimering af vores tekniske maskinpark for at opnå en høj stabilitet & forsyningssikkerhed
• Kvalitetssikring af procedurer & processer samt dokumentation vedrørende aktivet i henhold til QA

Test Specialist til test af avancerede radarsystemer

Har du erfaring med test af elektroniske systemer, og vil du være en del højteknologisk produktionsvirksomhed i vækst?

Er du på udkig efter en rolle, hvor du får en afvekslende hverdag med mulighed for at udvikle dig?

Weibel er en dansk familieejet virksomhed, der udvikler og producerer avancerede radarsystemer til kunder over det meste af verden. Vi producerer alt in-house, og bygger de forskellige komponenter sammen til færdige radarsystemer, som bliver testet på vores test center.

International Trainer - Technology & Audiology

You will develop training materials and conduct training activities to equip our local wholesale organizations to professionally train hearing care professionals on Oticon, Bernafon and Philips hearing solutions.

You will do this by using your creativity along with your audiological and technological knowledge to create presentations, videos, and e-learning modules that support hearing care professionals to understand our products and be able to counsel their clients on the benefits of these solutions.

LTECH søger CTS-teknikere til forskellige områder af deres forretning

Vi søger CTS-teknikere til at servicere anlæg på Sjælland. Du starter hjemmefra og som regel ved du i god tid, hvad dagen bringer, da du som oftest selv har planlagt dine opgaver efter aftaler med kunderne.

Arbejdsopgaverne kan bl.a. være:

• Planlagt vedligehold af systemerne. Der kan opstå akutte situationer, hvormed disse opgaver aftales med din leder. Kunderne er primært industri, store ejendomme, skoler, kommuner og detailkoncerner.
• Afrapportering og dokumentering.

Produktchef til Pneumatik

Vil du dele din tekniske specialistviden med vores kunder og udvikle OEM´s pneumatik-leverandører på det danske marked? Har du produktchef-erfaring med pneumatik, eller kommer dit kendskab til produkterne fra din hverdag som fx salgskonsulent, intern sælger, produktspecialist eller noget helt andet?

Hos OEM Automatic Klitsø går vi op i din succes og medarbejdertrivsel. Vi synes, at det skal være sjovt at gå på arbejde. Vi prioriterer fællesskabet højt og afholder løbende arrangementer på tværs af afdelinger og i teamet.